
The rubber caps shipped with the Box can be used to prevent this problem.

Once you have peeled a battery, you must be careful to store and handle it properly. If such contact occurs, a charged battery will quickly overheat. It is essential that you make sure that the tips of your peeled batteries do not come into contact with any metallic items, as this can result in accidentally making a connection between the positive nipple and the negative casing. This keeps the battery cooler and prevents accidental loss of the load and the charge. Magic-Flight recommends that Box users get into the habit of pulling the battery back after each draw.

("Hot" is when you would not want to hold the battery in your hand - hotter than hot coffee). It is okay for them to get warm (when charging or in use), but hot is not good, as it shortens the life of the battery. Magic-Flight leaves them on only for cosmetic reasons and removes them if they ever come loose or get in the way.Īlso, it is important NOT to let the batteries get too hot. Incidentally, the paper ring on the positive end of the battery does not matter much. (WD-40 also works) Just spray on and rub the glue off with a paper towel to expose the metal battery casing. You can clean this off using a product such as Goo Gone. Most battery labels simply peel off cleanly, but some manufacturers use a glue underneath the label (Sanyo). Please be careful if you use a sharp tool to cut the label-do not dent or cut through the metallic battery casing. The battery does not work in the Box otherwise. Removing the battery label makes this possible. The coil in the Box needs to make electrical contact with the battery. You need to peel the label off the battery (exposing the metal casing) to use it with the Box. How should I prepare and care for my vaporizer batteries? Doing this doesn't destroy them, but it reduces their lifetime much more quickly. If you mix the two types and also have a fast charger, be sure to mark them so that you don't put LSD batteries through a fast charge cycle. Unfortunately, LSD batteries do not handle 15 minute chargers as well-they need a slower, more accurate charger.

LSD batteries, on the other hand, remain "ready for use" once they are fully charged for months at a time-people do not have to remember to put them back in the charger as frequently, or to keep them there to be usable. They need to be "topped off" every three days or so, but they have the advantage that they can be put in a 15 minute charger. HSD batteries only provide about 30% longer in-use time (say, six solid minutes of "burn" time), which may or may not be significant. Have a higher capacity range (up to 2800 mAh).Ĭan be used in fast chargers (15 minutes).īest for heavy/frequent use: Maha Powerex 2700 mAh.Ĭhoosing between the batteries depends on your usage habits. Have a shelf life measured in days, or weeks at best. Have a lower capacity range (2000-2400 mAh).Ĭan be damaged if charged too quickly (faster than 60 minutes is not recommended). There are two types of NiMH batteries available: low self-discharge (LSD) and high self-discharge (HSD).Īre usually marketed as "pre-charged" or "ready-to-use".
